Tuesday, May 5, 2009

Invisible Bookshelves

You've all seen these invisible bookshelves, right? The books stack horizontally and and appear to just float on the wall.

Floating Bookshelves

They look really cool, but they can cost a bundle.

Fortunately, they're easy and cheap to make from simple L-brackets.

A bit of careful measuring and making sure they're level, and you're ready to start stacking.

Easy to Make

Just make sure they're well anchored to the wall!

An Invisible Set of Shelves

***** It's so nice to see so many visitors to this post. If you're wondering where I've gone, I'm now writing over at HappySimple

I hope you'll stop by and say hello!******

50 comments:

  1. Cool! This is so much better than other ideas where you have to destroy a book to be able to have "invisible" book shelves. =)

    ReplyDelete
  2. Yeah, I'm really not fond of destroying books - books are my friends!

    Thanks for stopping by!

    ReplyDelete
  3. I want to know more about the newspaper on the wall. It looks very cool!

    ReplyDelete
  4. Awesome idea!

    What if you added a clear plastic band (or large rubber band) around the bottom book so you can actually hide the L brackets inside the book?

    I think that would be even cooler cause it would really look floating, even from beneath.

    ReplyDelete
  5. David - That's BRILLIANT!!!

    I'll give it a try and report back next week.

    Lisa - the explanation for the newspaper on the wall can be found here: http://maydecemberhome.blogspot.com/2008/11/alternatives-to-wallpaper.html

    And Kim, thanks so much for your support. You're the best!

    ReplyDelete
  6. That is just awesome! And it looks so good! I've been running out of space for my books, this might be a good way to solve it! Thanks!

    ReplyDelete
  7. These look really clean. But actually owning books is so like, what 1997? After reading them, I take them back to the library...

    Owning books = Bad for environment.

    Sharing books = Good for environment.

    ReplyDelete
  8. I don't believe you wrote a post about screwing angle brackets to a wall. ?

    ReplyDelete
  9. Nice idea. Thanks for sharing.

    ReplyDelete
  10. MBC - thanks

    Mick - put that way...

    Moose - you make a good point.

    And I do actually make heavy use of our local library. The books I buy are the ones I know I'll look to again and again and often they're second-hand when I buy them.

    ReplyDelete
  11. I couldn't have found this at a better time. I just purchased floating shelves and attempted to store some books on them knowing full well that it couldn't hold the weight (what can I say, I like to learn things the hard way!) Frustrated, I was looking for another option today and stumbled across this. Just having your basic bookshelf wasn't really what I wanted and this is the perfect alternative. I will be at my local hardware store tonight purchasing those L-shaped brackets. Yay for new shelving ideas!

    ReplyDelete
  12. Yay for great timing!

    I'd love to see pics when they're done.

    ReplyDelete
  13. If you put a book with a paper cover (I forget what it's called) on the bottom, you could slit the cover in two spots, slide it onto the brackets, and you could have the appearance of floating books without ruining an entire book -- just the cover.

    ReplyDelete
  14. Another brilliant suggestion!

    (It's called a dust jacket)

    Thanks!

    ReplyDelete
  15. very cool idea and I saw you on Beach Bungalow!

    ReplyDelete
  16. Thanks for the head's up!

    And, um, I'm glad you like the shelves.

    ReplyDelete
  17. They look great, but it's all about those brackets, isn't it? I've been searching for them online, but can't find them anywhere -- where did you get them?

    ReplyDelete
  18. Down at my local Home Hardware. I think they're a pretty basic hardware store item...

    ReplyDelete
  19. Wow! This is seriously genius!! thanks for the great tip!

    ReplyDelete
  20. You're welcome! Thanks for the great compliment!

    ReplyDelete
  21. Do you have to anchor the brackets to studs only? If yes, then won't the dist.bw studs be a limitation? If no, then what else can we use to anchor the brackets firmly considering that books can be heavy. I'm planning to stack Nat.Geos which can get heavy.

    ReplyDelete
  22. If the wall behind is plaster or drywall and sturdy, you can use those plastic anchors to secure the screws.

    If you're worried about the weight of the magazines, you could try having less space between the brackets (vertically) so that you can't overload them.

    Good luck!

    ReplyDelete
  23. Love this idea!

    For Moose, you wouldn't be able to enjoy those books from the library if no one ever bought them. Without buyers, there would be no publishing. There's give and take to everything. Just something to think about...

    ReplyDelete
  24. I must say that is wonderfull!

    I was looking for something I could do in my badroon and... that's it!

    Thanks,

    Now you can say:"hay, my idea is in a badroon in Brazil! Isent that cool?" LOL

    ReplyDelete
  25. These bookshelves have traveled more than I have! :)

    But, yes, it's very cool.

    ReplyDelete
  26. I've got another idea about how to hide the bottom brackets.

    What if you slid a paperclip around the bottom leg and then bent out a portion to form an arm to support the book cover. you'd see a tiny portion of the paperclip arm, but not the whole L bracket.

    What did you end up doing?

    ReplyDelete
  27. Thanks for the great idea, Dana!

    I ended up taking the lazy route and just ignoring the visible bits.

    ReplyDelete
  28. Grat and cheap idea. What if, instead of starting stacking with a book, I used a "fake" book to hold the others? A piece of wood wrapped in nice paper, pretending to be a cover?

    ReplyDelete
  29. Great idea, Vania! This would add stability to the bottom of the pile. Thanks!

    ReplyDelete
  30. Just wondering how anyone else has handled the mounting issue regarding studs and drywall. Like most builds, my walls only have a stud every 16 inches. So I can get one bracket on a stud, but they other will just have to go in with anchors. Has anyone had a problem with this, considering the weight of books? Or better yet, a solution?

    ReplyDelete
  31. How about Orange featured this cool idea. I love how the books looked against the wall. Now I know what to do with all my husbands books that are in every nook and cranny. Thanks for sharing.

    ReplyDelete
  32. As usual, I'm late to the party, but in response to the query regarding studs, why not screw one bracket into the stud, the place some sort of platform on the portion of the L that sticks out. Then you'd only have to use 1 bracket per shelf. Am I totally off base, here?

    ReplyDelete
  33. You'd have to be really careful to keep everything balanced.

    ReplyDelete
  34. wow this is a wonderful idea. I've been looking around for an efficient book storage idea and this is just wat m going to do now. Thanx a lot :)

    ReplyDelete
  35. Great idea !!!!
    I will bring your idea to my blog in Brazil, ok?
    Thanks.

    ReplyDelete
  36. That would be great! A link back to this post would be appreciated!

    ReplyDelete
  37. I found the angle brackets at Home Depot in the building supplies area. There was a whole display of different joints and brackets. This is going to be my weekend project.

    ReplyDelete
  38. awesome! seen theese inviseble bookshelves in a magazine, but I was worried about ruining any books :)

    ReplyDelete
  39. I just blogged about this awesome idea! Wanted to let you know that I mentioned you and your lovely blog, and this great tutorial!

    ReplyDelete
  40. If you use two angle brackets (or a thin piece of metal bent at right angles)cut off all but a couple of mm's on one, then mount them one over the top of the other (with the shorter one behind and just slightly lower. This allows for the bottom book to have the long piece between the back cover and bulk of the book, and then have the back cover just hooked in between the long piece and the couple of mm's left on the slightly lower bracket stopping the cover from falling down. This means you don't ruin the book and also hides any evidence of the bracketry.

    ReplyDelete
  41. Very very clever! Thanks for sharing.

    ReplyDelete

Thanks so much for taking the time to comment!